Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground

- Make sure there is enough space on all sides

It is specifically designed for PLA and ABS

nGen is best printed on a heated build platform

3DE Premium - PETG - Solid White - 2

PrintaClean - 250ml PrintaFix // Lim Revision 2 of the Mega2560PrintaClean 250ml PrintaClean If it's hard to get your glue off the building board, PrintaClean is the solution! PrintaClean can clean your building board. Allow the build plate to cool to room temperature. Then remove the build plate from the 3D printer and spray a generous amount of PrintaClean on it. Let it sit for 20 30 seconds to loosen. Wipe off any residue with a piece of paper. Repeat if necessary. PrintaClean If it's hard to get your glue off